| project | content |
|---|---|
| Order product number | GL-118H |
| model | GL-118H |
| installation method | unshielded |
| working distance | 5mm±10% (Note): The maximum working distance is the maximum distance that the sensor can detect the standard detection object. |
| Stable detection range | 0mm~4mm (Note): The stable detection range is the detection distance at which the sensor can stably detect the standard detection object (even under the condition that the ambient temperature changes and/or the power supply voltage fluctuates). |
| Standard detection object | Iron plate 18mm×18mm×t1mm |
| Hysteresis | Less than 15% of the working distance (standard detection object) |
| voltage | 10V～30V DC pulse P-P10% or less |
| current consumption | Below 10mA |
| output state | ON when approaching |
| output | • Applied voltage: 30V DC or less • Load current: 100mA or less • Residual voltage: 1.5V or less (at a load current of 100mA) |
| Short circuit protection | equipped (auto recovery) |
| Working Status Indicator | Orange LED indicator (lights up when the output is ON) |
| response frequency | 1kHz |
| Environmental performance: protective structure | IP67G (Note): If used in an environment where cutting oil splashes, the product may deteriorate due to additives contained in the oil, so please confirm the resistance of the cutting oil used in advance. |
| Environmental performance: Use ambient temperature | -25°C～+70°C (no condensation or frost), storage: -25°C～+70°C |
| Environmental performance: Use ambient humidity | Below 35%RH~85%RH, storage: 35%RH~85%RH |
| Environmental performance: withstand voltage | Connect AC voltage 1000V between all connected power terminals and the shell for 1 minute |
| Environmental Performance: Insulation Resistance | Between all power connection terminals and the shell, more than 500MΩ, based on a megger of DC500V |
| Environmental performance: Vibration resistance | In X, Y and Z directions, it can withstand vibrations with a frequency of 10Hz~50Hz and a double amplitude of 1.5mm for 2 hours |
| Environmental performance: impact resistance | It can withstand three shocks with an acceleration of 500m/s² (about 50G) in each direction of X, Y and Z |
| material | Shell: ABS+PBT |
| cable | 3-core oil-resistant rubber cable with a cross-sectional area of 0.2mm², length 1m |
| cable extension | The total length of the cable with a cross-sectional area of 0.2mm² or more can be extended to 100m |
| weight | about 65g |
en-gb
Germany
