Bộ lập trình PLC_Ethernet I/P KV-5500 Keyence
| Model | KV-5500 | |||
| Type | CPU Unit | |||
| General specifications | Power voltage | 24 VDC (±10%) | ||
| Operating ambient temperature | 0 to +50°C (with no frost)*1*2 | |||
| Operating ambient humidity | 10 to 95%RH (no condensation)*3 | |||
| Ambient temperature for storage | -20 to +70°C*3 | |||
| Storage relative humidity | 10 to 95 % RH (No condensation)*1*4 | |||
| Operating environment | Without dust and corrosive gas | |||
| Altitude | 2,000 m or less | |||
| Noise immunity | 1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator) | |||
| Withstand voltage | 1,500 VAC for 1 minute between the power supply terminal and the I/O terminals and between all the external terminals and the case | |||
| Insulation resistance | 50 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminals and between all the external terminals and the case) | |||
| Shock resistance | Acceleration 150 m/s2, Operation time 11 ms, twice in each of the X, Y and Z directions | |||
| Overvoltage category | II (when using KV-U7) | |||
| Pollution degree | 2 | |||
| Vibration resistance | Intermittent vibration | Frequency 5 to 9 Hz | Half amplitude: 3.5 mm*5 | |
| Frequency 9 to 150 Hz | Acceleration: 9.8 m/s2*5 | |||
| Continuous vibration | Frequency 5 to 11 Hz | Half amplitude: 1.75 mm*5 | ||
| Frequency 9 to 150 Hz | Acceleration: 4.9 m/s2*5 | |||
| Performance specifications | Arithmetic control mode | Stored program mode | ||
| I/O control mode | Refresh mode | |||
| Program language | Expanded ladder, KV Script, mnemonic | |||
| Number of commands | Basic instruction: 81 classes, 182 instructions Applied instruction: 42 classes, 59 instructions Arithmetic operation instruction: 124 classes, 315 instructions Extended instruction: 124 classes, 315 instructions Total: 345 classes, 703 instructions |
|||
| Instruction execution speed | Basic instruction: Min. 10 ns Applied instruction: Min. 20 ns Double precision floating-point instruction: Min. 2,350 ns |
|||
| Program capacity | Approx. 260k steps | |||
| Maximum number of units to be installed | 16 units (48 units when expansion units are connected) | |||
| Maximum number of I/O points | Maximum 3,096 points for expansion (KV-EB1S/KV-EB1R: When 2 units are expanded, 64-point I/O unit is used) | |||
| Bit device | Input relay R | Total 16,000 points 1 bit | ||
| Output relay R | ||||
| Internal auxiliary relay R | ||||
| Link relay B | 16,384 points 1 bit | |||
| Internal auxiliary relay MR | 16,000 points 1 bit | |||
| Latch relay LR | ||||
| Control relay CR | 640 points 1 bit | |||
| Word device | Timer T | 4,000 points 32 bits | ||
| Counter C | ||||
| Data memory DM | 65,535 points 16 bits | |||
| Expansion data memory EM | ||||
| File register | Memory bank switching mode FM | 32,768 points × 4 memory banks 16 bits | ||
| Dial mode ZF | 131,072 points 16 bits | |||
| Link register W | 16,384 points 16 bits | |||
| Temporary data memory TM | 512 points 16 bits | |||
| High-speed counter CTH | 2 points 32 bits | |||
| 4 points 32 bits (2 points for one high-speed counter) | ||||
| Index register Z | 12 points 32 bits | |||
| Control memory CM | 6,000 points 16 bits | |||
| Positioning pulse output | 2 points (maximum output frequency: 100 kHz) | |||
| CPU unit I/O | Input: 16 points, output: 8 points | |||
| Power failure hold function | Program memory | Flash ROM can be rewritten 100,000 times | ||
| Device | 5 years (operating ambient temperature of 25°C in the power failure hold mode)*6 | |||
| Self-diagnosis function | CPU abnormal, RAM abnormal, other | |||
| Internal current consumption | CPU unit: 320 mA or less Expansion unit: KV-EB1S 15 mA or less, KV-EB1R 25 mA or less (except the drive current for input loop) |
|||
| Weight | CPU unit: approx. 320 g End unit: Approx. 30 g, Start unit for KV-5500/5000/3000: approx. 20 g Expansion unit: KV-EB1S approx. 90 g, KV-EB1R approx. 115 g |
|||
